Corn mill: Unterschied zwischen den Versionen

Version vom 1. Mai 2020, 12:47 Uhr

	Corn mill Basic Data Category: Mills URL (first publication): https://www.youtube.com/watch?v=anW5-WbnmtA License: CC BY-SA Project status: Active Translation status: 1-Without Translation Technical documentation Maturity of the project: prototyp Assembly instructions are published: Yes Bill of materials is published: Yes Contributing guide is published: Yes Mechanical hardware Contains original mechanical hardware: Yes CAD Format: License for mechanical hardware: CC BY-SA Electronic hardware Contains original electronic hardware: No no no no Other Contains original software: No Design files are in original format: No Free redistribution is allowed licence: Yes

Description

home made corn mill from youtube

+ General Reviews 39

Part number 1.1 -- Dietrich-reviewer (Diskussion) 17:04, 1. Mai 2020 (CEST)

the distance from the holes to the beginning or end of frame 2 is missing

Re: Part number 1.1 -- Bjoern (Diskussion) 09:05, 3. Jun. 2020 (CEST)

Part number 2.4 -- Dietrich-reviewer (Diskussion) 17:19, 1. Mai 2020 (CEST)

plan is missing

Part number 2.3 -- Dietrich-reviewer (Diskussion) 17:25, 1. Mai 2020 (CEST)

there is a wrong plan witout meausres

Re: Part number 2.3 -- Djaeger (Diskussion) 18:01, 1. Mai 2020 (CEST)

I changed the wrong plan for the right plan

Part number 3.1 -- Dietrich-reviewer (Diskussion) 17:27, 1. Mai 2020 (CEST)

this plan is showing the assemby of the whole Pulley Disc >>> sorry, I checked it again, tha plan is right

Re: Part number 3.1 -- Djaeger (Diskussion) 18:02, 1. Mai 2020 (CEST)

ok, perfect

Part number 3.8 -- Dietrich-reviewer (Diskussion) 17:37, 1. Mai 2020 (CEST)

I think it is easier and cheaper to buy this part insteaad producing it, did you try to buy it?

Re: Part number 3.8 -- Djaeger (Diskussion) 18:04, 1. Mai 2020 (CEST)

I tried but i did not find what I need

Re: Re: Part number 3.8 -- Dietrich-reviewer (Diskussion) 18:05, 1. Mai 2020 (CEST)

I tried to find it, I think this can fit: https://www.ebay.de/itm/Keilriemen-scheibe-2-rillig-Riemenscheibe-Welle-20-00-mm/273642320244 - what do you think?

Part number 4.9 -- Dietrich-reviewer (Diskussion) 17:48, 1. Mai 2020 (CEST)

plan is missing

Re: Part number 4.9 -- Djaeger (Diskussion) 18:07, 1. Mai 2020 (CEST)

sorry but this is wrong, I will check too where to get ...

Part number 5 -- Dietrich-reviewer (Diskussion) 17:51, 1. Mai 2020 (CEST)

I found this: https://de.rs-online.com/web/p/scharniere/2702758

is it ok?

Re: Part number 5 -- Djaeger (Diskussion) 18:08, 1. Mai 2020 (CEST)

sorry but this is wrong, I will check too where to get ...

Part number 1.1 -- Bjoern (Diskussion) 09:04, 3. Jun. 2020 (CEST)

Specification of the material is missing

Re: Part number 1.1 -- Martin (Diskussion) 18:58, 8. Jul. 2020 (CEST)

TsDC COM-MAN says: mandatory if necessary for the technical design. From my perspective, its not very necessary here to define the material any finer than 'construction steel'

Part number 1.2 -- Bjoern (Diskussion) 09:08, 3. Jun. 2020 (CEST)

symmetry lines and material is missing

Part number 0 -- Bjoern (Diskussion) 09:12, 3. Jun. 2020 (CEST)

3D explosion view is not allowed for assembly drawing, it can be additional though

Re: Part number 0 -- Lukas (Diskussion) 12:22, 3. Jun. 2020 (CEST)

Where does it say so? Can you maybe add an example of what is needed.

Re: Re: Part number 0 -- Bjoern (Diskussion) 17:56, 11. Jun. 2020 (CEST)

here are three of the common methods described: https://www.hs-anhalt.de/fileadmin/Dateien/FB6/personen/voigt_st/Lehrunterlagen/05_CAD/03_techZeich_Darstellungen.pdf

most common in mechanical engineering is Projektionsmethode 1

Part number 0 -- Lukas (Diskussion) 12:21, 3. Jun. 2020 (CEST)

The screws are missing in the drawing.

Part number 1.1 -- Lukas (Diskussion) 12:28, 3. Jun. 2020 (CEST)

In the drawing of part number 1 this part has only two holes. The symetric lines is missing if the part is symetric in both directions.

Re: Part number 1.1 -- Martin (Diskussion) 18:59, 8. Jul. 2020 (CEST)

doesn't seem to be symmetric; from my perspective just the measurements for the hole positions are missing

Part number 1.3 -- Lukas (Diskussion) 12:32, 3. Jun. 2020 (CEST)

Where is that part used?

Re: Part number 1.3 -- Bjoern (Diskussion) 18:47, 11. Jun. 2020 (CEST)

yes, it is not shown in the assembly drawing...

Part number 2.4 -- Lukas (Diskussion) 12:34, 3. Jun. 2020 (CEST)

The symetric line in one direction is missing.

Part number 1 -- Lukas (Diskussion) 12:40, 3. Jun. 2020 (CEST)

This drawing does not show the tubes, 1.2 and 1.3. And how are the parts linked? By welding?

Part number 2 -- Bjoern (Diskussion) 18:55, 11. Jun. 2020 (CEST)

3D explosion view is not good, better use Projektionsmethode 1

Part number 3 -- Bjoern (Diskussion) 18:59, 11. Jun. 2020 (CEST)

3D explosion view is not good, better use Projektionsmethode 1

Part number 3.1 -- Bjoern (Diskussion) 19:02, 11. Jun. 2020 (CEST)

the inner diameter is missing as well as the material

Part number 3.2 -- Bjoern (Diskussion) 19:04, 11. Jun. 2020 (CEST)

material?

Part number 3.3 -- Bjoern (Diskussion) 19:05, 11. Jun. 2020 (CEST)

Material?

Part number 3.3 -- Bjoern (Diskussion) 19:12, 11. Jun. 2020 (CEST)

tolerances for the diameter like 11h7 would be usefull, to ensure that it fits tight on the disk (No. 2)

Part number 3.2 -- Bjoern (Diskussion) 19:16, 11. Jun. 2020 (CEST)

tolerances for the diameter like 11K7 would be usefull, to ensure that it fits tight on (No. 3)

Part number 3 -- Bjoern (Diskussion) 19:19, 11. Jun. 2020 (CEST)

the shaft (3.7) is not shown in the drawing

Part number 3 -- Bjoern (Diskussion) 19:20, 11. Jun. 2020 (CEST)

the destribution of forces between 1 and 2 is not clear

Part number 4 -- Bjoern (Diskussion) 19:27, 11. Jun. 2020 (CEST)

it is not clear e.g. how 5 is connected to 4 -> projektionsmethode 1 and add measures

-- Bjoern (Diskussion) 19:30, 11. Jun. 2020 (CEST)

Materials of all parts are missing

Part number 4.4 -- Bjoern (Diskussion) 19:31, 11. Jun. 2020 (CEST)

symmetry line

Add Review

Parts list

Part number	Pos No.	Code	Part Type	Part Name	Specifications	Quantity	Review Status

001	2	1.2		Frame 1 / Rahmen 1 / Marco 1		2	Edit
Add Review
002	1	1.1		Frame 2 / Rahmen 2 / Marco 2		2	Edit
Add Review
003	4	1.4	Production	Tube 1x1 / Rohr 1x1 / Tubo1x1		1	Edit
Add Review
004	3	1.3	Production	Round Tube 1 1/8 / Rundrohr 1 1/8 / Tubo Redondo 1 1/8		1	Edit
Add Review
005	2	2.2	Production	Lower Funnel 2 / Unterer Trichter 2 / Tolva Inferior 2		2	Edit
Add Review
006	1	2.1	Production	Lower Funnel 1 / Unterer Trichter 1 / Tolva Inferior 1		2	Edit
Add Review
009	8	3.8	Production	Pulley / Riemenscheibe / Polea		1	Edit
Add Review
010	7	3.7	Production	Axis / Achse / Eje		1	Edit
Add Review
011	3	3.3	Production	Bolt / Bolzen / Pasador		5	Edit
Add Review
012	9	3.9	Production	Key / Schl�ssel / Chaveta		2	Edit
Add Review
013	5	3.5	Production	Hammer / / Martillo		8	Edit
Add Review
014	2	3.2	Production	Disc / Scheibe / Disco Polea		5	Edit
Add Review
015	1	3.1	Production	Bush Tapered / Buchse / Bocina		1	Edit
Add Review
016	4	3.4	Production	Spacer / Distanzscheibe / Separador		4	Edit
Add Review
017	1	4.1	Production	Side Part Funnel 1 / Seitenteil Trichter 1 / Lateral Tolva 1		2	Edit
Add Review
018	9	4.9	Production	Side Part Funnel 2A / Seitenteil Trichter 2A / Lateral Tolva 2A		1	Edit
Add Review
019	5	4.5	Production	Side Part Funnel 5 / Seitenteil Trichter 5 / Lateral Tolva 5		4	Edit
Add Review
020	3	4.3	Production	Side Part Funnel 4 / Seitenteil Trichter 4 / Lateral Tolva 4		2	Edit
Add Review
021	4	4.4	Production	Side Part Funnel 3 / Seitenteil Trichter 3 / Lateral Tolva 3		2	Edit
Add Review
022	8	4.8	Production	Side Part Funnel 8 / Seitenteil Trichter 8 / Lateral Tolva 8		1	Edit
Add Review
023	7	4.7	Production	Side Part Funnel 7 / Seitenteil Trichter 7 / Lateral Tolva 7		1	Edit
Add Review
024	6	4.6	Production	Side Part Funnel 6 / Seitenteil Trichter 6 / Lateral Tolva 6		1	Edit
Add Review
025	11	4.11	Production	Lever / Hebel / Palanca		1	Edit
Add Review
026	10	4.10	Production	Gate / Tor / Compuerta		1	Edit
Add Review
no	1	1	Production	Base Frame / Grundrahmen / Marco Base		1	Edit
Add Review
no	2	2	Production	Lower Funnel / Unterer Trichter / Tolva Inferior		1	Edit
Add Review
no	3	3	Production	Pulley Disc / Riemenscheibe / Disco Polea		1	Edit
Add Review
no	6	3.6	Buy	Housing Bearing / Gehaeuselager / Chumacera	24200-20204	2	Edit
Add Review
no	4	4	Production	Upper Hopper / Oberer Trichter / Tolba Superior		1	Edit
Add Review
no	5	5	Buy	Hinge / Scharnier / Bisagra	72-1-3635	1	Edit
Add Review
no	6	6	Buy	Closure / Verschluss / Cierre	420091	1	Edit
Add Review
018A	2	4.2	Production	Side Part Funnel 18A / Seitenteil Trichter 18A / Lateral Tolva 18A		1	Edit
Add Review
A001	3	2.3	Production	Angle Base/ Winkelbasis / / Base Angulo		1	Edit
Add Review

Report this page

@@ Zeile 21: / Zeile 21: @@
 |versioning_system=no
 |Materials={{ProjektMaterials
-|matpartnumber=xyz
+|matpartnumber=no
 |matposold=1
 |matdrawingsheet=1
+|matparttype=production
 |matdesc=Base Frame /  Grundrahmen /  Marco Base
 |matquantity=1
-|matpdffile=marco base.pdf
 }}{{ProjektMaterials
-|matpartnumber=2
+|matpartnumber=002
 |matposold=1
 |matdrawingsheet=1.1
@@ Zeile 34: / Zeile 34: @@
 |matquantity=2
 }}{{ProjektMaterials
-|matpartnumber=1
+|matpartnumber=001
 |matposold=2
 |matdrawingsheet=1.2
@@ Zeile 40: / Zeile 40: @@
 |matquantity=2
 }}{{ProjektMaterials
-|matpartnumber=4
+|matpartnumber=004
 |matposold=3
 |matdrawingsheet=1.3
+|matparttype=production
 |matdesc=Round Tube 1 1/8 /  Rundrohr 1 1/8 /  Tubo Redondo 1 1/8
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=3
+|matpartnumber=003
 |matposold=4
 |matdrawingsheet=1.4
+|matparttype=production
 |matdesc=Tube 1x1 /  Rohr 1x1 /  Tubo1x1
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=xyz
+|matpartnumber=no
 |matposold=2
 |matdrawingsheet=2
+|matparttype=production
 |matdesc=Lower Funnel /  Unterer Trichter /  Tolva Inferior
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=6
+|matpartnumber=006
 |matposold=1
 |matdrawingsheet=2.1
+|matparttype=production
 |matdesc=Lower Funnel 1 /  Unterer Trichter 1 /  Tolva Inferior 1
 |matquantity=2
 }}{{ProjektMaterials
-|matpartnumber=5
+|matpartnumber=005
 |matposold=2
 |matdrawingsheet=2.2
+|matparttype=production
 |matdesc=Lower Funnel 2 /  Unterer Trichter 2 /  Tolva Inferior 2
 |matquantity=2
@@ Zeile 73: / Zeile 78: @@
 |matposold=3
 |matdrawingsheet=2.3
+|matparttype=production
 |matdesc=Angle Base/ Winkelbasis /   /  Base Angulo
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=xyz
+|matpartnumber=no
 |matposold=3
 |matdrawingsheet=3
+|matparttype=production
 |matdesc=Pulley Disc /  Riemenscheibe /  Disco Polea
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=15
+|matpartnumber=015
 |matposold=1
 |matdrawingsheet=3.1
+|matparttype=production
 |matdesc=Bush Tapered /  Buchse /  Bocina
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=14
+|matpartnumber=014
 |matposold=2
 |matdrawingsheet=3.2
+|matparttype=production
 |matdesc=Disc /  Scheibe /  Disco Polea
 |matquantity=5
 }}{{ProjektMaterials
-|matpartnumber=11
+|matpartnumber=011
 |matposold=3
 |matdrawingsheet=3.3
+|matparttype=production
 |matdesc=Bolt /  Bolzen /  Pasador
 |matquantity=5
 }}{{ProjektMaterials
-|matpartnumber=16
+|matpartnumber=016
 |matposold=4
 |matdrawingsheet=3.4
+|matparttype=production
 |matdesc=Spacer /  Distanzscheibe /  Separador
 |matquantity=4
 }}{{ProjektMaterials
-|matpartnumber=13
+|matpartnumber=013
 |matposold=5
 |matdrawingsheet=3.5
+|matparttype=production
 |matdesc=Hammer /   /  Martillo
 |matquantity=8
 }}{{ProjektMaterials
-|matpartnumber=10
+|matpartnumber=no
+|matposold=6
+|matdrawingsheet=3.6
+|matparttype=buy
+|matdesc=Housing Bearing /  Gehaeuselager /  Chumacera
+|matspec=24200-20204
+|matquantity=2
+}}{{ProjektMaterials
+|matpartnumber=010
 |matposold=7
 |matdrawingsheet=3.7
+|matparttype=production
 |matdesc=Axis /  Achse /  Eje
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=9
+|matpartnumber=009
 |matposold=8
 |matdrawingsheet=3.8
+|matparttype=production
 |matdesc=Pulley /  Riemenscheibe /  Polea
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=12
+|matpartnumber=012
 |matposold=9
 |matdrawingsheet=3.9
+|matparttype=production
 |matdesc=Key /  Schl�ssel /  Chaveta
 |matquantity=2
 }}{{ProjektMaterials
-|matpartnumber=xyz
+|matpartnumber=no
 |matposold=4
 |matdrawingsheet=4
+|matparttype=production
 |matdesc=Upper Hopper /  Oberer Trichter /  Tolba Superior
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=17
+|matpartnumber=017
 |matposold=1
 |matdrawingsheet=4.1
+|matparttype=production
 |matdesc=Side Part Funnel 1 /  Seitenteil Trichter 1 /  Lateral Tolva 1
 |matquantity=2
@@ Zeile 145: / Zeile 170: @@
 |matposold=2
 |matdrawingsheet=4.2
+|matparttype=production
 |matdesc=Side Part Funnel 18A /  Seitenteil Trichter 18A /  Lateral Tolva 18A
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=20
+|matpartnumber=020
 |matposold=3
 |matdrawingsheet=4.3
+|matparttype=production
 |matdesc=Side Part Funnel 4 /  Seitenteil Trichter 4 /  Lateral Tolva 4
 |matquantity=2
 }}{{ProjektMaterials
-|matpartnumber=21
+|matpartnumber=021
 |matposold=4
 |matdrawingsheet=4.4
+|matparttype=production
 |matdesc=Side Part Funnel 3 /  Seitenteil Trichter 3 /  Lateral Tolva 3
 |matquantity=2
 }}{{ProjektMaterials
-|matpartnumber=19
+|matpartnumber=019
 |matposold=5
 |matdrawingsheet=4.5
+|matparttype=production
 |matdesc=Side Part Funnel 5 /  Seitenteil Trichter 5 /  Lateral Tolva 5
 |matquantity=4
 }}{{ProjektMaterials
-|matpartnumber=24
+|matpartnumber=024
 |matposold=6
 |matdrawingsheet=4.6
+|matparttype=production
 |matdesc=Side Part Funnel 6 /  Seitenteil Trichter 6 /  Lateral Tolva 6
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=23
+|matpartnumber=023
 |matposold=7
 |matdrawingsheet=4.7
+|matparttype=production
 |matdesc=Side Part Funnel 7 /  Seitenteil Trichter 7 /  Lateral Tolva 7
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=22
+|matpartnumber=022
 |matposold=8
 |matdrawingsheet=4.8
+|matparttype=production
 |matdesc=Side Part Funnel 8 /  Seitenteil Trichter 8 /  Lateral Tolva 8
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=18
+|matpartnumber=018
 |matposold=9
 |matdrawingsheet=4.9
+|matparttype=production
 |matdesc=Side Part Funnel 2A /  Seitenteil Trichter 2A /  Lateral Tolva 2A
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=26
+|matpartnumber=026
 |matposold=10
 |matdrawingsheet=4.10
+|matparttype=production
 |matdesc=Gate /  Tor /  Compuerta
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=25
+|matpartnumber=025
 |matposold=11
 |matdrawingsheet=4.11
+|matparttype=production
 |matdesc=Lever /  Hebel /  Palanca
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=xyz
+|matpartnumber=no
 |matposold=5
 |matdrawingsheet=5
+|matparttype=buy
 |matdesc=Hinge /  Scharnier /  Bisagra
 |matspec=72-1-3635
 |matquantity=1
 }}{{ProjektMaterials
-|matpartnumber=xyz
+|matpartnumber=no
 |matposold=6
 |matdrawingsheet=6
+|matparttype=buy
 |matdesc=Closure /  Verschluss /  Cierre
 |matspec=420091