Cookies helfen uns bei der Bereitstellung von Open Source Ecology (OSE) Germany - Entwicklungsplattform. Durch die Nutzung von Open Source Ecology (OSE) Germany - Entwicklungsplattform erklärst du dich damit einverstanden, dass wir Cookies speichern.

PCB Holder: Unterschied zwischen den Versionen

Aus Open Source Ecology (OSE) Germany - Entwicklungsplattform
Wechseln zu:Navigation, Suche
(Änderung 102994 von Djaeger (Diskussion) rückgängig gemacht.)
(Markierung: Rückgängigmachung)
 
(32 dazwischenliegende Versionen von 5 Benutzern werden nicht angezeigt)
Zeile 12: Zeile 12:
 
|desc=PCB Holder used for brazing Search Printed circuit boards
 
|desc=PCB Holder used for brazing Search Printed circuit boards
 
|TechDoc={{ProjektComponent
 
|TechDoc={{ProjektComponent
 +
|cmptitle=Test
 +
|cmpimg=<html>
 +
<input type="checkbox"> Item A.<br>
 +
<input type="checkbox"> Item B.<br>
 +
<input type="checkbox"> Item C.<br>
 +
</html>
 +
}}{{ProjektComponent
 
|cmptitle=PCB Holder technical drawings
 
|cmptitle=PCB Holder technical drawings
−
|cmpfile1=01.00 PCB Holder2
+
|cmpfile1=01.00 PCB HOLDER.pdf
 
|cmpfile2=01.01 Arm.pdf
 
|cmpfile2=01.01 Arm.pdf
 
|cmpfile3=01.02 Bracket.pdf
 
|cmpfile3=01.02 Bracket.pdf
−
|cmpfile4=Test01.pdf
+
|cmpfile4=01.00 PCB HOLDER new.pdf
 
}}{{ProjektComponent
 
}}{{ProjektComponent
 
|cmptitle=STL_Files
 
|cmptitle=STL_Files
Zeile 28: Zeile 35:
 
|matdesc=arm
 
|matdesc=arm
 
|matquantity=2
 
|matquantity=2
 +
|status_rev_1=in process
 
}}{{ProjektMaterials
 
}}{{ProjektMaterials
 
|matpartnumber=2
 
|matpartnumber=2
Zeile 33: Zeile 41:
 
|matdesc=bracket
 
|matdesc=bracket
 
|matquantity=2
 
|matquantity=2
 +
|status_rev_1=in process
 +
|status_rev_2=in process
 
}}{{ProjektMaterials
 
}}{{ProjektMaterials
 
|matpartnumber=3
 
|matpartnumber=3
 
|matdesc=track
 
|matdesc=track
 
|matquantity=1
 
|matquantity=1
 +
|status_rev_1=rejected
 +
|status_rev_2=rejected
 +
|status_rev_3=approved
 
}}{{ProjektMaterials
 
}}{{ProjektMaterials
 
|matpartnumber=4
 
|matpartnumber=4
Zeile 43: Zeile 56:
 
|matquantity=1
 
|matquantity=1
 
|status_rev_1=approved
 
|status_rev_1=approved
 +
|status_rev_2=approved
 
}}{{ProjektMaterials
 
}}{{ProjektMaterials
 
|matpartnumber=5
 
|matpartnumber=5
Zeile 48: Zeile 62:
 
|matspec=ISO 10511 - M8
 
|matspec=ISO 10511 - M8
 
|matquantity=4
 
|matquantity=4
 +
|status_rev_1=in process
 +
|status_rev_2=in process
 
}}{{ProjektMaterials
 
}}{{ProjektMaterials
 
|matpartnumber=6
 
|matpartnumber=6
Zeile 53: Zeile 69:
 
|matspec=DIN 125-1 - B 8,4
 
|matspec=DIN 125-1 - B 8,4
 
|matquantity=5
 
|matquantity=5
 +
|status_rev_1=approved
 +
|status_rev_2=approved
 
}}{{ProjektMaterials
 
}}{{ProjektMaterials
 
|matpartnumber=7
 
|matpartnumber=7
Zeile 58: Zeile 76:
 
|matspec=ISO 4032 - M5 , Typ 1 - Produktklasse A und B
 
|matspec=ISO 4032 - M5 , Typ 1 - Produktklasse A und B
 
|matquantity=3
 
|matquantity=3
 +
|status_rev_2=in process
 
}}{{ProjektMaterials
 
}}{{ProjektMaterials
 
|matpartnumber=8
 
|matpartnumber=8
Zeile 63: Zeile 82:
 
|matspec=ISO 4017 - M5 x 20
 
|matspec=ISO 4017 - M5 x 20
 
|matquantity=3
 
|matquantity=3
 +
|status_rev_1=approved
 +
|status_rev_2=approved
 
}}{{ProjektMaterials
 
}}{{ProjektMaterials
 
|matpartnumber=9
 
|matpartnumber=9
Zeile 68: Zeile 89:
 
|matspec=ISO 4014 - M8 x 60
 
|matspec=ISO 4014 - M8 x 60
 
|matquantity=1
 
|matquantity=1
 +
|status_rev_1=approved
 +
|status_rev_2=approved
 
}}{{ProjektMaterials
 
}}{{ProjektMaterials
 
|matpartnumber=10
 
|matpartnumber=10
Zeile 73: Zeile 96:
 
|matspec=VD_090W_02_1 STEP AP214
 
|matspec=VD_090W_02_1 STEP AP214
 
|matquantity=1
 
|matquantity=1
 +
|status_rev_1=rejected
 +
|status_rev_2=in process
 
}}{{ProjektMaterials
 
}}{{ProjektMaterials
 
|matpartnumber=11
 
|matpartnumber=11
Zeile 78: Zeile 103:
 
|matspec=ISO 4017 - M5 x 10
 
|matspec=ISO 4017 - M5 x 10
 
|matquantity=1
 
|matquantity=1
 +
|status_rev_1=in process
 +
|status_rev_2=in process
 
}}{{ProjektMaterials
 
}}{{ProjektMaterials
 
|matpartnumber=12
 
|matpartnumber=12
 
|matdesc=entire project
 
|matdesc=entire project
 +
|status_rev_1=in process
 +
|status_rev_2=open
 
}}
 
}}
−
|reviewer1=Djaeger
+
|certificate_requested=Nein
−
|reviewer2=OSEG
+
|reviewer1=Lukas
−
|reviewer3=Tuberlin
+
|reviewer2=Micha
 
}}
 
}}

Aktuelle Version vom 29. Mai 2020, 10:43 Uhr

PCB Holder.PNGBracket.png

PCB Holder

Basic Data

Category: Computer, electronics

Keywords: PCB Holder

















no

no no



Other




Design files are in original format: No

Free redistribution is allowed licence: No







Description

PCB Holder used for brazing Search Printed circuit boards

Technical documentation

Test

<html>

<input type="checkbox"> Item A.
<input type="checkbox"> Item B.
<input type="checkbox"> Item C.
</html>

PCB Holder technical drawings

Files:

01.00 PCB HOLDER.pdf
01.01 Arm.pdf
01.02 Bracket.pdf
01.00 PCB HOLDER new.pdf

STL_Files

STL_Files for 3D Printer 
Files:

bracket.stl
arm.stl


+ General Reviews General Reviews3

Assembly instructions -- Djaeger (Diskussion) 15:54, 28. Apr. 2020 (CEST)

this is a test review

Re: Test01 -- Djaeger (Diskussion) 15:55, 28. Apr. 2020 (CEST)

reply 1

Re: Test01 -- Djaeger (Diskussion) 15:56, 28. Apr. 2020 (CEST)

reply02

Add Review

Parts list

Part number Pos No. Code Part Type Part Name Specifications Quantity Review Status Show All Comments
1 01.01 arm 2

REV1:

Edit

Item Reviews15

Part number 1 -- Djaeger (Diskussion) 18:50, 9. Mär. 2020 (CET)

in some details the drawings would be easier to understand if different line widths were used

Detail drawing 03.2.png

Re: Part number 1 -- OSEG (Diskussion) 09:13, 10. Mär. 2020 (CET)

wich lines do you suggest should be smaller/wider?

Re: Re: Part number 1 -- Djaeger (Diskussion) 09:34, 10. Mär. 2020 (CET)

just the contour of the parts a bit thicker

Part number 1 -- Djaeger (Diskussion) 18:59, 9. Mär. 2020 (CET)

but this is of course only optional ;-)

Part number 1 -- Djaeger (Diskussion) 19:20, 9. Mär. 2020 (CET)

is there a stl-file for 3D printer?

Re: Part number 1 -- OSEG (Diskussion) 09:16, 10. Mär. 2020 (CET)

yes, they are added

Part number 1 -- Djaeger (Diskussion) 19:22, 9. Mär. 2020 (CET)

Are plastics other than PLA - EN-13432 permitted?

Part number 1 -- Djaeger (Diskussion) 19:24, 9. Mär. 2020 (CET)

Position number for left arm and bracket missing in http://test.oho.wiki/images/9/99/01.00_PCB_HOLDER.pdf

Re: Part number 1 -- OSEG (Diskussion) 09:18, 10. Mär. 2020 (CET)

they are identical with the right side, so there need to be only one;)

Part number 1 -- Djaeger (Diskussion) 19:27, 9. Mär. 2020 (CET)

in the BOM the two arms (Part Number 1) are identic, in the drawing they seem not to be identic, or am I wromg?

Re: Part number 1 -- OSEG (Diskussion) 09:19, 10. Mär. 2020 (CET)

they are identic, but the left side other holes are used for the screws, than on the right side

Part number 1 -- OSEG (Diskussion) 12:06, 13. Apr. 2020 (CEST)

The drawing seems very overloaded, maybe you could move some dimensions to the perspective to the lower left.

Part number 1 -- Lukas (Diskussion) 21:39, 24. Apr. 2020 (CEST)

    1. Überschrift
  • Die 3D-Ansicht könnte um 180° gedreht werden, damit man einen Einschub der Mutter sieht.

Part number 1 -- Micha (Diskussion) 21:39, 24. Apr. 2020 (CEST)

The designed space for the nuts (7) should be bigger. Due to tolerances it's not certain the nuts fit.

Part number 1 -- Lukas (Diskussion) 21:43, 24. Apr. 2020 (CEST)

Alle Durchgangslöcher auf NORM DIN EN 20273 prüfen. 5,2 ist zum Beispiel zu eng.

Add Review

2 01.02 bracket 2

REV1:
REV2:

Edit

Item Reviews3

Part number 2 -- Djaeger (Diskussion) 19:30, 9. Mär. 2020 (CET)

see comments en Part Number 1

Part number 2 -- Lukas (Diskussion) 21:14, 24. Apr. 2020 (CEST)

M8 - Durchgangslöcher müssen mindestens einen Durchmesser von 8,4mm haben. (fein) DIN EN 20273 Für 3D-gedruckte Teile ist wahrscheinlich mittel (=9mm) oder sogar grob (=10mm) besser.

Part number 2 -- Lukas (Diskussion) 21:26, 24. Apr. 2020 (CEST)

Die Aufnahme für die Mutter ist mit genau 13mm zu eng, weil der 3D-Drucker auch noch Toleranzen hat. Also mindestens 13,5 mm. Muss ja nicht genau passen.

Add Review

3 track 1

REV1:
REV2:
REV3: Approved

Edit

Item Reviews3

Part number 3 -- Djaeger (Diskussion) 18:36, 9. Mär. 2020 (CET)

what material should the track be made of, what are its dimensions?

Fehler beim Erstellen des Vorschaubildes: Datei mit Abmessungen größer als 12,5 MP
OHO.png

Part number 3 -- Djaeger (Diskussion) 19:39, 9. Mär. 2020 (CET)

at least make recomendations e.g. if it has to be metal, which length you would recommend (min-max), if there are standard sizes for PCB etc.

Re: Part number 3 -- Lukas (Diskussion) 22:04, 24. Apr. 2020 (CEST)

There needs to be a technical drawing if it is not a standard part.

Add Review

4 hexagon bolt ISO 4014 - M8 x 40 1

REV1: Approved
 REV2: Approved

Edit

Item Reviews

Add Review

5 hexagon bolt ISO 10511 - M8 4

REV1:
REV2:

Edit

Item Reviews3

Part number 5 -- Djaeger (Diskussion) 19:34, 9. Mär. 2020 (CET)

is this a bolt or a nut?

Re: Part number 5 -- OSEG (Diskussion) 13:42, 10. Mär. 2020 (CET)

the standard refers to nuts

Re: Re: Part number 5 -- Micha (Diskussion) 22:09, 24. Apr. 2020 (CEST)

needs to be changed in BOM

Add Review

6 flat washer DIN 125-1 - B 8,4 5

REV1: Approved
 REV2: Approved

Edit

Item Reviews

Add Review

7 hexagon nut ISO 4032 - M5 , Typ 1 - Produktklasse A und B 3

REV2:

Edit

Item Reviews4

Part number 7 -- Djaeger (Diskussion) 19:34, 9. Mär. 2020 (CET)

is this a bolt or a nut?

Re: Part number 7 -- OSEG (Diskussion) 09:24, 10. Mär. 2020 (CET)

is changed
I guess, people need to be aware of the wiki syntax to keep this threads readable :) Or we look over them from time to time

Re: Re: Part number 7 -- Martin (Diskussion) 15:33, 24. Apr. 2020 (CEST)

Replace this text with your reply ← ahhh haven't seen that

Part number 7 -- Micha (Diskussion) 21:16, 24. Apr. 2020 (CEST)

Needs to be changed in BOM as well.

Add Review

8 hexagon bolt ISO 4017 - M5 x 20 3

REV1: Approved
 REV2: Approved

Edit

Item Reviews

Add Review

9 hexagon bolt ISO 4014 - M8 x 60 1

REV1: Approved
 REV2: Approved

Edit

Item Reviews

Add Review

10 compression spring VD_090W_02_1 STEP AP214 1

REV1:
REV2:

Edit

Item Reviews1

Part number 10 -- Micha (Diskussion) 22:25, 24. Apr. 2020 (CEST)

what kind of specification is this? Why not DIN standard?

Add Review

11 hexagon nut ISO 4017 - M5 x 10 1

REV1:
REV2:

Edit

Item Reviews1

Part number 11 -- Micha (Diskussion) 22:17, 24. Apr. 2020 (CEST)

bolt

Add Review

12 entire project

REV1:
REV2: Open

Edit

Item Reviews4

Part number 12 -- Djaeger (Diskussion) 20:16, 9. Mär. 2020 (CET)

cold you add part numbers in the text area of the drawings?

Part number 12 -- Micha (Diskussion) 21:15, 24. Apr. 2020 (CEST)

Does the general tolerance of "medium" make sense for additive manufactured components? Seems unrealistic for most of the printers. Nozzle diameter between 0.25 - 0.8 mm for regular printers

Part number 12 -- Micha (Diskussion) 22:30, 24. Apr. 2020 (CEST)

position numbers in assembly drawings should be at the edges of the drawing in a horizontal or vertical line.

Part number 12 -- Micha (Diskussion) 22:57, 24. Apr. 2020 (CEST)

description of funcion, overall dimensions, weight and maximum space between brackets are missing.

Add Review

Report this page


Abgerufen von „http://test.oho.wiki/index.php?title=PCB_Holder&oldid=103778“
  • Product search
  • Kategorien
  • The Open Hardware Observatory (OHO)
  • New Product
  • Agriculture, forest
  • Business, industry
  • Computer, electronics
  • Environmental technologies
  • Health
  • Mobility, Logistics
  • Renewable energies
  • oho.wiki
  • Open Source Ecology Germany e.V.
  • Technical University of Berlin
  • Contakt
  • Impressum
  • Datenschutzerklärung
  • CC-BY 4.0
    • CC 2019 open hardware observatory
    |
  • Impressum
    • |
  • Legal