Diskussion:PCB Holder

Part number 3 -- Djaeger (Diskussion) 18:36, 9. Mär. 2020 (CET)

what material should the track be made of, what are its dimensions?

Part number 1 -- Djaeger (Diskussion) 18:50, 9. Mär. 2020 (CET)

in some details the drawings would be easier to understand if different line widths were used

Re: Part number 1 -- OSEG (Diskussion) 09:13, 10. Mär. 2020 (CET)

wich lines do you suggest should be smaller/wider?

Part number 1 -- Djaeger (Diskussion) 18:59, 9. Mär. 2020 (CET)

but this is of course only optional ;-)

Part number 1 -- Djaeger (Diskussion) 19:20, 9. Mär. 2020 (CET)

is there a stl-file for 3D printer?

Re: Part number 1 -- OSEG (Diskussion) 09:16, 10. Mär. 2020 (CET)

yes, they are added

Part number 1 -- Djaeger (Diskussion) 19:22, 9. Mär. 2020 (CET)

Are plastics other than PLA - EN-13432 permitted?

Part number 1 -- Djaeger (Diskussion) 19:24, 9. Mär. 2020 (CET)

Position number for left arm and bracket missing in http://test.oho.wiki/images/9/99/01.00_PCB_HOLDER.pdf

Part number 1 -- Djaeger (Diskussion) 19:27, 9. Mär. 2020 (CET)

in the BOM the two arms (Part Number 1) are identic, in the drawing they seem not to be identic, or am I wromg?

Part number 2 -- Djaeger (Diskussion) 19:30, 9. Mär. 2020 (CET)

see comments en Part Number 1

Part number 5 -- Djaeger (Diskussion) 19:34, 9. Mär. 2020 (CET)

is this a bolt or a nut?

Part number 7 -- Djaeger (Diskussion) 19:34, 9. Mär. 2020 (CET)

is this a bolt or a nut?

Part number 3 -- Djaeger (Diskussion) 19:39, 9. Mär. 2020 (CET)

at least make recomendations e.g. if it has to be metal, which length you would recommend (min-max), if there are standard sizes for PCB etc.

Part number 12 -- Djaeger (Diskussion) 20:16, 9. Mär. 2020 (CET)

cold you add part numbers in the text area of the drawings?