Corn mill: Unterschied zwischen den Versionen
| Zeile 21: | Zeile 21: | ||
|versioning_system=no | |versioning_system=no | ||
|Materials={{ProjektMaterials | |Materials={{ProjektMaterials | ||
| + | |matpartnumber=corn mill complete | ||
| + | |matparttype=production | ||
| + | |matpdffile=A005.pdf | ||
| + | }}{{ProjektMaterials | ||
|matpartnumber=no | |matpartnumber=no | ||
|matposold=1 | |matposold=1 | ||
Version vom 1. Mai 2020, 13:07 Uhr
|
Corn mill Basic Data Category: Mills URL (first publication): https://www.youtube.com/watch?v=anW5-WbnmtA License: CC BY-SA Project status: Active Translation status: 1-Without Translation Technical documentation Maturity of the project: prototyp
Assembly instructions are published: Yes Bill of materials is published: Yes Contributing guide is published: Yes Mechanical hardware Contains original mechanical hardware: Yes CAD Format: License for mechanical hardware: CC BY-SA Electronic hardware Contains original electronic hardware: No
no no no
Other Contains original software: No
Design files are in original format: No Free redistribution is allowed licence: Yes
|
Description
home made corn mill from youtube
+ General Reviews 
39
Part number 1.1 -- Dietrich-reviewer (Diskussion) 17:04, 1. Mai 2020 (CEST)
the distance from the holes to the beginning or end of frame 2 is missing
Re: Part number 1.1 -- Bjoern (Diskussion) 09:05, 3. Jun. 2020 (CEST)
Part number 2.4 -- Dietrich-reviewer (Diskussion) 17:19, 1. Mai 2020 (CEST)
plan is missing
Part number 2.3 -- Dietrich-reviewer (Diskussion) 17:25, 1. Mai 2020 (CEST)
there is a wrong plan witout meausres
Re: Part number 2.3 -- Djaeger (Diskussion) 18:01, 1. Mai 2020 (CEST)
I changed the wrong plan for the right plan
Part number 3.1 -- Dietrich-reviewer (Diskussion) 17:27, 1. Mai 2020 (CEST)
this plan is showing the assemby of the whole Pulley Disc >>> sorry, I checked it again, tha plan is right
Re: Part number 3.1 -- Djaeger (Diskussion) 18:02, 1. Mai 2020 (CEST)
ok, perfect
Part number 3.8 -- Dietrich-reviewer (Diskussion) 17:37, 1. Mai 2020 (CEST)
I think it is easier and cheaper to buy this part insteaad producing it, did you try to buy it?
Re: Part number 3.8 -- Djaeger (Diskussion) 18:04, 1. Mai 2020 (CEST)
I tried but i did not find what I need
Re: Re: Part number 3.8 -- Dietrich-reviewer (Diskussion) 18:05, 1. Mai 2020 (CEST)
I tried to find it, I think this can fit: https://www.ebay.de/itm/Keilriemen-scheibe-2-rillig-Riemenscheibe-Welle-20-00-mm/273642320244 - what do you think?
Part number 4.9 -- Dietrich-reviewer (Diskussion) 17:48, 1. Mai 2020 (CEST)
plan is missing
Re: Part number 4.9 -- Djaeger (Diskussion) 18:07, 1. Mai 2020 (CEST)
sorry but this is wrong, I will check too where to get ...
Part number 5 -- Dietrich-reviewer (Diskussion) 17:51, 1. Mai 2020 (CEST)
I found this: https://de.rs-online.com/web/p/scharniere/2702758
is it ok?
Re: Part number 5 -- Djaeger (Diskussion) 18:08, 1. Mai 2020 (CEST)
sorry but this is wrong, I will check too where to get ...
Part number 1.1 -- Bjoern (Diskussion) 09:04, 3. Jun. 2020 (CEST)
Specification of the material is missing
Re: Part number 1.1 -- Martin (Diskussion) 18:58, 8. Jul. 2020 (CEST)
- TsDC COM-MAN says: mandatory if necessary for the technical design. From my perspective, its not very necessary here to define the material any finer than 'construction steel'
Part number 1.2 -- Bjoern (Diskussion) 09:08, 3. Jun. 2020 (CEST)
symmetry lines and material is missing
Part number 0 -- Bjoern (Diskussion) 09:12, 3. Jun. 2020 (CEST)
3D explosion view is not allowed for assembly drawing, it can be additional though
Re: Part number 0 -- Lukas (Diskussion) 12:22, 3. Jun. 2020 (CEST)
Where does it say so? Can you maybe add an example of what is needed.
Re: Re: Part number 0 -- Bjoern (Diskussion) 17:56, 11. Jun. 2020 (CEST)
- here are three of the common methods described: https://www.hs-anhalt.de/fileadmin/Dateien/FB6/personen/voigt_st/Lehrunterlagen/05_CAD/03_techZeich_Darstellungen.pdf
most common in mechanical engineering is Projektionsmethode 1
Part number 0 -- Lukas (Diskussion) 12:21, 3. Jun. 2020 (CEST)
The screws are missing in the drawing.
Part number 1.1 -- Lukas (Diskussion) 12:28, 3. Jun. 2020 (CEST)
In the drawing of part number 1 this part has only two holes. The symetric lines is missing if the part is symetric in both directions.
Re: Part number 1.1 -- Martin (Diskussion) 18:59, 8. Jul. 2020 (CEST)
- doesn't seem to be symmetric; from my perspective just the measurements for the hole positions are missing
Part number 1.3 -- Lukas (Diskussion) 12:32, 3. Jun. 2020 (CEST)
Where is that part used?
Re: Part number 1.3 -- Bjoern (Diskussion) 18:47, 11. Jun. 2020 (CEST)
- yes, it is not shown in the assembly drawing...
Part number 2.4 -- Lukas (Diskussion) 12:34, 3. Jun. 2020 (CEST)
The symetric line in one direction is missing.
Part number 1 -- Lukas (Diskussion) 12:40, 3. Jun. 2020 (CEST)
This drawing does not show the tubes, 1.2 and 1.3. And how are the parts linked? By welding?
Part number 2 -- Bjoern (Diskussion) 18:55, 11. Jun. 2020 (CEST)
3D explosion view is not good, better use Projektionsmethode 1
Part number 3 -- Bjoern (Diskussion) 18:59, 11. Jun. 2020 (CEST)
3D explosion view is not good, better use Projektionsmethode 1
Part number 3.1 -- Bjoern (Diskussion) 19:02, 11. Jun. 2020 (CEST)
the inner diameter is missing as well as the material
Part number 3.2 -- Bjoern (Diskussion) 19:04, 11. Jun. 2020 (CEST)
material?
Part number 3.3 -- Bjoern (Diskussion) 19:05, 11. Jun. 2020 (CEST)
Material?
Part number 3.3 -- Bjoern (Diskussion) 19:12, 11. Jun. 2020 (CEST)
tolerances for the diameter like 11h7 would be usefull, to ensure that it fits tight on the disk (No. 2)
Part number 3.2 -- Bjoern (Diskussion) 19:16, 11. Jun. 2020 (CEST)
tolerances for the diameter like 11K7 would be usefull, to ensure that it fits tight on (No. 3)
Part number 3 -- Bjoern (Diskussion) 19:19, 11. Jun. 2020 (CEST)
the shaft (3.7) is not shown in the drawing
Part number 3 -- Bjoern (Diskussion) 19:20, 11. Jun. 2020 (CEST)
the destribution of forces between 1 and 2 is not clear
Part number 4 -- Bjoern (Diskussion) 19:27, 11. Jun. 2020 (CEST)
it is not clear e.g. how 5 is connected to 4 -> projektionsmethode 1 and add measures
-- Bjoern (Diskussion) 19:30, 11. Jun. 2020 (CEST)
Materials of all parts are missing
Part number 4.4 -- Bjoern (Diskussion) 19:31, 11. Jun. 2020 (CEST)
symmetry line
Parts list
| Part number | Pos No. | Code | Part Type | Part Name | Specifications | Quantity | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|---|
| 001 | 2 | 1.2 | Production | Frame 1 / Rahmen 1 / Marco 1 | 2 | |
|||
| 002 | 1 | 1.1 | Production | Frame 2 / Rahmen 2 / Marco 2 | 2 | |
|||
| 003 | 4 | 1.4 | Production | Tube 1x1 / Rohr 1x1 / Tubo1x1 | 1 | |
|||
| 004 | 3 | 1.3 | Production | Round Tube 1 1/8 / Rundrohr 1 1/8 / Tubo Redondo 1 1/8 | 1 | |
|||
| 005 | 2 | 2.2 | Production | Lower Funnel 2 / Unterer Trichter 2 / Tolva Inferior 2 | 2 | |
|||
| 006 | 1 | 2.1 | Production | Lower Funnel 1 / Unterer Trichter 1 / Tolva Inferior 1 | 2 | |
|||
| 009 | 8 | 3.8 | Production | Pulley / Riemenscheibe / Polea | 1 | |
|||
| 010 | 7 | 3.7 | Production | Axis / Achse / Eje | 1 | |
|||
| 011 | 3 | 3.3 | Production | Bolt / Bolzen / Pasador | 5 | |
|||
| 012 | 9 | 3.9 | Production | Key / Schluessel / Chaveta | 2 | |
|||
| 013 | 5 | 3.5 | Production | Hammer / / Martillo | 8 | |
|||
| 014 | 2 | 3.2 | Production | Disc / Scheibe / Disco Polea | 5 | |
|||
| 015 | 1 | 3.1 | Production | Bush Tapered / Buchse / Bocina | 1 | |
|||
| 016 | 4 | 3.4 | Production | Spacer / Distanzscheibe / Separador | 4 | |
|||
| 017 | 1 | 4.1 | Production | Side Part Funnel 1 / Seitenteil Trichter 1 / Lateral Tolva 1 | 2 | |
|||
| 018 | 9 | 4.9 | Production | Side Part Funnel 2A / Seitenteil Trichter 2A / Lateral Tolva 2A | 1 | |
|||
| 019 | 5 | 4.5 | Production | Side Part Funnel 5 / Seitenteil Trichter 5 / Lateral Tolva 5 | 4 | |
|||
| 020 | 3 | 4.3 | Production | Side Part Funnel 4 / Seitenteil Trichter 4 / Lateral Tolva 4 | 2 | |
|||
| 021 | 4 | 4.4 | Production | Side Part Funnel 3 / Seitenteil Trichter 3 / Lateral Tolva 3 | 2 | |
|||
| 022 | 8 | 4.8 | Production | Side Part Funnel 8 / Seitenteil Trichter 8 / Lateral Tolva 8 | 1 | |
|||
| 023 | 7 | 4.7 | Production | Side Part Funnel 7 / Seitenteil Trichter 7 / Lateral Tolva 7 | 1 | |
|||
| 024 | 6 | 4.6 | Production | Side Part Funnel 6 / Seitenteil Trichter 6 / Lateral Tolva 6 | 1 | |
|||
| 025 | 11 | 4.11 | Production | Lever / Hebel / Palanca | 1 | |
|||
| 026 | 10 | 4.10 | Production | Gate / Tor / Compuerta | 1 | |
|||
| no | 1 | 1 | Production | Base Frame / Grundrahmen / Marco Base | 1 | |
|||
| no | 2 | 2 | Production | Lower Funnel / Unterer Trichter / Tolva Inferior | 1 | |
|||
| no | 3 | 3 | Production | Pulley Disc / Riemenscheibe / Disco Polea | 1 | |
|||
| no | 6 | 3.6 | Buy | Housing Bearing / Gehaeuselager / Chumacera | 24200-20204 | 2 | |
||
| no | 4 | 4 | Production | Upper Hopper / Oberer Trichter / Tolba Superior | 1 | |
|||
| no | 5 | 5 | Buy | Hinge / Scharnier / Bisagra | 72-1-3635 | 1 | |
||
| no | 6 | 6 | Buy | Closure / Verschluss / Cierre | 420091 | 1 | |
||
| 018A | 2 | 4.2 | Production | Side Part Funnel 18A / Seitenteil Trichter 18A / Lateral Tolva 18A | 1 | |
|||
| A001 | 3 | 2.3 | Production | Angle Base/ Winkelbasis / / Base Angulo | 1 | |
|||
| corn mill complete | Production | |
|||||||
I believe there are quite a view screws, nuts, grease nipples,… missing here :)
