3D Printable EX Delta Printer by Matthew Palulis
|
3D Printable EX Delta Printer by Matthew Palulis Basic Data Category: Projects URL (first publication): https://www.myminifactory.com/object/3d-print-ex-delta-printer-39891
no no
Other
Design files are in original format: No Free redistribution is allowed licence: No
|
Description
6-12-2017: as of today, the new EX Delta is done and working.
I've added springs to bed so I can adjust them.
I've also added a second power supply to power the bed, it was taking way to long to heat extruder and bed at same time, so second power supply with a 25 amp power module.
I've also added the firmware I used to get this Delta working.
I've also included a lower base so this Delta will be and extra 2 inches higher to accommodate the extra power supply.
In conclusion, everything I tried or used is added to this delta, they all work, I just tried different variations till I liked the current final version.
This final version with the 300mm rods can print on a 12 inch print bed if you want to take this version to the next level.
The final print area is 220x454.7 with and extra 40mm at top.
| Date published | 11/07/2017 |
| Licenses | |
| Technology | FDM |
| Complexity | Difficult |
+ General Reviews 
0
