3D Printable Flying extruder for Delta printers by toth zoltan
|
3D Printable Flying extruder for Delta printers by toth zoltan Basic Data Category: Projects URL (first publication): https://www.myminifactory.com/object/3d-print-flying-extruder-for-delta-printers-42469
no no
Other
Design files are in original format: No Free redistribution is allowed licence: No
|
Description
Hello all,
I designed this flying extruder mod for my BIQU printer because it's far better for avoid extrusion problems with long PTFE tube and flexible filaments, now the tube are only 70mm long before it was 650mm
This can avoid problems with too many retractions, avoid flexible filaments extrusion, avoid filament bend in tube, etc
I designed that for my BIQU Kossel Pro printer, but it can work with any delta printers with 20x20 aluminium profile and with standard linear guide(maybe need to change pendulum size, if you need other size, ask me and I will make other sizes)
Follow carefully instructions for a good result
What you need : (many things are already on your printer)
-print all my stl :p
-40mm stepper motor
-625 bearing / x2
-M2x4 hex screw / x12
-M5x30 hex screw and M5 nut / x2
-M4x8 hex screw and T-nut (boat nut) / x2
-M3x14 hex screw / x2-4 (depend on your extruder type)
-Elastic tensioner or sewing Elastic
-rope or very thin steel cable
I can not be held responsible if something broke or if the printer self-destructs
If you have any suggestions or questions, do not hesitate to contact me
You can print pendulum, the extruder support and the roll at 0.2mm resolution
but it's IMPORTANT to print the carriage support at 0.1mm for have a solid base that support the tiny 2mm screws
| Date published | 11/08/2017 |
| Licenses | |
| Support Free | YES |
+ General Reviews 
