Save Space with a Collapsible Bike Trailer Make:

	Save Space with a Collapsible Bike Trailer Make: Basic Data Category: Projects URL (first publication): https://makezine.com/projects/origami-folding-bike-trailer/ no no no Other Design files are in original format: No Free redistribution is allowed licence: No

Description

Save Space with a Collapsible Bike Trailer

This roomy bike trailer folds flat so it stows anywhere

By
Time Required: 8–16 Hours (A Weekend)
Difficulty: Easy

Photo by Hep Svadja

After looking for bike trailers, I wasn’t thrilled with the choices. Spend $250 for one I sort of like? It was just too much. So I built this folding, origami-ish trailer on the fly with what I had at hand. In New York City space is at a premium, so it had to fold up so that I can store it in my squish-box of an apartment. I decided right away to use ½” plywood; I knew ¾” would be too much weight.

Here are the results of my tinkering. There’s lots of room for improvement, but it easily carries 100+ pounds. Plus I can stick my monstrous Chevy Volt battery inside — really extending the range of my electric bike

With the handle I designed, it also works as a simple cart. I drew up some rudimentary plans to help you build one too.

1. Build the folding box

Follow the assembly diagrams and photos here (Figure A), then test the folding action. I found that the folds worked fairly well. If the box sags, you can keep it nice and square by adding 2 hasps inside, to lock each bottom panel to a front or back panel.

2. Add the wheels

The axles are ½” bolts attached directly to the plywood with large flange washers. I used a 5/8″ spade bit for the axle holes.

Figure B. Photo by Hep Svadja

Test-fold the trailer again and mark where the wheel bolts touch the bottom panels. Then drill 1″ clearance holes for the axle nuts to fit into (Figure B), so it’s narrower when it’s folded (Figure C).

Figure C. Photo by Hep Svadja

3. Add the top cover

Since it all has to collapse, the top cover is removable for storage. I used 3 hasps to attach it; the 2 inside hasps I had to bend for a better fit. I locked mine with little carabiners (Figure D) but you could also just use a twist-lock style hasp.

Figure D. Photo by Ray T. Lam

Photo by Ray T. Lam

4. Paint

Remove the wheels and paint the trailer. I used Boeing green epoxy primer.

5. Make the tow bar

Figure E

For the tow arms (Figure E), I used 1/8″ flat steel bar from Home Depot and bent it to the configuration you see here. For the handle I used 1″ aluminum pipe. Threaded rod (¼”) holds the pipe between the bars.

6. Final assembly

Figure F. Photo by Ray T. Lam

I used four 5/16″ bolts with wingnuts to attach the tow bar to the trailer, because I want it to be removable. If you remove only the 2 rear bolts it folds down neatly (Figure F).

I’m using a bungee cord right now to attach it to my rear bike rack. Just haven’t gotten around to building a better coupling yet — stay tuned.

There you have it. It still needs lots of minor modifications but it’s very usable — and foldable

Photo by Ray T. Lam

November 1, 2016, 6:30 am PST

Parts

—FOR THE TRAILER—
Plywood, ½", about 4'×6' total Sides 16"×22" (2), bottom panels 9"×22" (2), front/back panels 9"×16" (4), top cover 23"×21" (1)
Hinges (18)
Hasps (5)
Wood screws, ½" enough to attach all your hinges and hasps
Carabiners (5) optional
Bike wheels, 24" (2)
Bolts, ½"×6" (2)
Nuts, ½" (4)
Fender washers, ½" (4)
Lock washers, ½" (2)
Paint
—FOR THE TOW BAR—
Steel or aluminum bar, 1/8"×1½"×24" (2)
Pipe, 1" diameter, 6" length
Threaded rod, ¼", 7" length
Cap nuts, ¼" (2)
Bolts, 5/16"×1" (4)
Wing nuts, 5/16" (4)
Washers, 5/16" (4)

Tools

Drill and bits 3/8" twist, 5/8" spade, 1" spade
Screwdriver

Ray T. Lam blogs his DIY projects at rtlbuiltdiy.blogspot.com and loves science, art, design, engineering, and philosophy.

+ General Reviews

Add Review

Report this page